2020 – Trampoline Swing

Title

Trampoline Swing

Description

Steel tripod frame with a suspended 14 trampoline

Will it need power?

No

If it will need power, what is your power plan?

Does the piece incorporate flame effects, moveable pieces, and/or is it climbable?

Yes

If it does incorporate flame effects, moveable pieces, and/or is climbable what is your safety plan? [(Note: if flame effects are used, your project will be subject to inspection by the Burnable Art Lead, who has final say if your project will burn during the event).]

We will check springs at regular intervals. The ropes will be rigged by industrial riggers and fabrication work is done by the guy who made lava lounge structure. It’s a solid piece.

Have you completed any other large scale art projects? (In this media? Where and when? How did the project go? Do you have pictures or recordings?)

This project is complete. I’m asking for a grant to offset expenses and to help with upgrades. We need to replace ropes so that they can be tied to clip attachments vs current clamp closure. I’d also like to add lighting and an aerial rig where before silks were directly attached to structure resulting in torn fabric. We had a successful experience at Myschevia but had to replace some clamps during safety checks so feel safety upgrades are necessary for a larger burn.

How much money do you need? (Up to $575) We are looking for a thorough itemized budget and the amount of grant money you are requesting.Please include a reasonably researched estimate of the cost of the materials you expect to need.

$575
Square Steel tubing $1200
Ropes $250
Clips $200
Welding supplies $50
Lighting $200
Aerial silk and rig/clip $150
Steel plating and rings for top connector $150
Transportation $300

If you want to upload something for the budget you can do that here:


What is your timeline detailing the planning, creation, installment, and removal of your project?

Project is complete. It requires about 1 hour to set up and 30 minutes to take down

Optional but encouraged: detailed drawings, CAD files/SketchUp documents, sketches, or other graphic illustrations of your creative concept.

We would like the artists to give community workshops outside of Flipside. Do you think you have a workshop idea that could be provided to the community? If so, please tell us what it is.

I make tooth art (plastic teeth) and you should too.

By applying for this grant you agree that if given the funds you plan to:

Work to compete your project by Flipside, Save and provide receipts of materials greater than or equal to grant amount by 07/25/20. If you do not provide this information you be disqualified from receiving a grant in the future., Complete a follow up report so we can learn

You may upload photos/recording of past projects here *You must have a Google account to do so.

https://drive.google.com/open?id=1soFvsVVdI8s-Kh7Y4bRazKh-NqZgzNO6,
https://drive.google.com/open?id=1AW0Z-MSgQ33F7ZEKpi7B31JwuEYal7ZL

We will be having the 2021 Ignition Philter fundraiser after the fall town hall (usually held in late September/ early October.) Would you be willing to bring the piece back for that event?

Maybe

Have you received funding from any other entity or regional for this piece previously? If so, who and how much?